Data Acquisition Systems
Data Acquisition System can measure an electrical or physical phenomenon such as voltage, current, temperature, pressure, or sound with a computer.
A DAQ system consists of sensors, DAQ measurement hardware, and a computer with programmable software.
Compared to traditional measurement systems, PC-based DAQ systems exploit the processing power, productivity, display, and connectivity capabilities of industry-standard computers providing a more powerful, flexible, and cost-effective measurement solution.
Portable Dynamic Signal Analyzer
DU-844D
-
The DU-844D Portable Dynamic Signal Analyzers is specially designed for modal experiment of force measurement method. Connecting to IEPE acceleration sensor and force sensor, DU-844D can be used for structural vibration test, as well as experimental modal analysis using hammer excitation method and exciter excitation method.
Portable Dynamic Signal Analyzer
DE-844W
-
The DE-844W Dynamic Signal Analyzers is a multi-channel simultaneous sampling dynamic signal test and analysis system, which is highly portable and suitable for industrial site. DE-844W can be used for remote monitoring via WIFI, and used for condition monitoring and fault diagnosis of rotating machinery such as pumps, fans, compressors and motors.
Portable Dynamic Signal Analyzer
DE-864W
-
The DE-864W Portable Dynamic Signal Analyzers is a multi-functional, high-portable data acquisition system composed of a high-performance embedded computer, a 9.7-inch HD touch display, a SSD and a DAQ card. DE-864W has abundant channel types and interfaces, which can be flexibly connected to various types of sensors to test and analyze a variety of physical quantities such as voltage, current, stress, strain, pressure, displacement, velocity, and acceleration.
Portable Dynamic Signal Test and Analysis System
DE-884U
-
The DE-884U Portable Dynamic Signal Test and Analysis System is specially designed for testing the strength and vibration characteristics of large structures, which applies independent distributed modules and can be used to accurately test the physical quantities such as force, pressure, displacement, velocity and acceleration. Expanded via Ethernet switch which supports IEEE1588 network synchronization and POE power supply, dynamic stress-strain or vibration input signals over 1000 channels can be synchronously tested and analyzed by a single computer.
Dynamic Signal Test and Analysis System
DE-944
-
The DE-944 is a synchronous-sampling, multi-functional Dynamic Signal Test and Analysis System designed for the strength and life evaluation test of large structure. DE-944 supports simultaneous sampling of 32/64 analog input channels with software-selectable GND, Sin-DC, Dif-DC, AC, Sin-IEPE, Dif-IEPE input configuration for measuring various of physical quantities, such as voltage, current, stress, strain, pressure, temperature, vibration and so on. If more than 64 analog input channels are required, multiple DE-944 can be expanded and synchronized via the Gigabit Ethernet switch, Synchronous clock box and Device-to-Device Bus to support over 1000 AI channels simultaneously sampling.
Isolated Dynamic Signal Test and Analysis System
DE-918
-
By means of multi-layer shielding and advanced isolation technology, DE-918 High-performance Isolated Dynamic Signal Test and Analysis System is especially suitable for accurately measuring physical quantities such as stress, strain, force, pressure, velocity and acceleration under high radiation and strong interference conditions.
Isolated Dynamic Signal Test and Analysis System
DE-918U
-
DE-918U Isolated Dynamic Signal Test and Analysis System, with the independent shielding for each channel and the high isolation between input and output, specially designed for the accurate measurement of various physical quantities such as strain, stress, force, pressure, displacement, velocity and acceleration under strong conducted interference. Expanded via Gigabit Ethernet switch, dynamic signals over 1,000 channels can be synchronously tested and analyzed by a single computer.
High Accuracy Dynamic DAQ System
DE-928U
-
DE-928U High Performance Dynamic Signal Test and Analysis System is specially designed for the accurate measurement of various physical quantities, such as stress, strain, force, pressure, displacement, velocity, acceleration and temperature. Expanded via Gigabit Ethernet switch, dynamic signals over 1,000 channels can be synchronously tested and analyzed by a single computer.
High Speed Data Acquisition System
DE-924U
-
DE-924U Dynamic Signal Test and Analysis System is specially designed for testing the dynamic characteristic of structure, and used for the measurement of various physical quantities such as stress, strain, force, pressure, displacement, velocity, acceleration, temperature. Expanded via Gigabit Ethernet switch, dynamic signals over 1,000 channels can be synchronously tested and analyzed by a single computer.
Isolated Dynamic Signal Test and Analysis System DE-916
-
The DE-916 High-performance Isolated Dynamic Signal Test and Analysis System is specially designed for accurate capture of transient signals in a strong interference environment. By means of multi-layer shielding technique, DE-916 effectively eliminate electromagnetic radiation and conduction interference, and ensure the accurate measurement of force, pressure, stress, strain, displacement, velocity, acceleration and other physical quantities.
Ultra-dynamic Signal Test and Analysis System DE-926U
-
DE-926U Ultra-dynamic Signal Test and Analysis System, with the frequency response of up to 1MHz and the transient sampling rate of up to 20MHz, specially designed for the accurate measurement of various physical quantities such as force, pressure, displacement, velocity and acceleration in impact experiment and blasting test. Expanded via Gigabit Ethernet switch, ultra-dynamic signals over 1,000 channels can be synchronously tested and analyzed by a single computer.